skip to main | skip to sidebar

Lydius-F82R

The building of the Ian Farrier designed F82R trimaran

Monday, March 9, 2009

Relaxing and daydreaming!! A virtual trip down under

Posted by MartinF at 3:39 PM No comments:

My own 18 foot skiff BODOTEX

Posted by MartinF at 3:38 PM No comments:
Newer Posts Older Posts Home
Subscribe to: Posts (Atom)

Followers

What is a F82?

What is a F82?
A fast cruising/racer trimaran 8.2 m long. The boat can fold to go on a trailer.

ON THE SLIP

ON THE SLIP
As seen here you can go anywhere with this boat.

The former model F25C

The former model F25C

Blog Archive

  • ►  2012 (1)
    • ►  June (1)
  • ►  2011 (20)
    • ►  September (1)
    • ►  August (2)
    • ►  March (7)
    • ►  February (10)
  • ▼  2009 (14)
    • ►  May (2)
    • ►  April (1)
    • ▼  March (2)
      • Relaxing and daydreaming!! A virtual trip down under
      • My own 18 foot skiff BODOTEX
    • ►  February (4)
    • ►  January (5)
  • ►  2008 (9)
    • ►  November (3)
    • ►  April (3)
    • ►  January (3)
  • ►  2007 (25)
    • ►  December (3)
    • ►  September (1)
    • ►  June (1)
    • ►  May (2)
    • ►  April (4)
    • ►  March (3)
    • ►  February (11)

About Me

My photo
MartinF
Hobro, Denmark
Boatbuilder of the old school, but building this very modern boat for myself.
View my complete profile

Other F-Boat builders and other F links

  • Nicos F85SR
  • Andrew's F82
  • Rod's F82 Australia
  • Etienne & Annie's F82 (in french, use Google Crome to translate)
  • Bukvaj F82 and other multies
  • Glenns F82
  • Farrier Marine, Inc.
  • Fram F39
  • Ed's F22
  • Grant's F22
  • Jay's F22
  • Optimum F22
  • Rogers F22
  • Tor's F 22R
  • Tatiana F32
  • Rod's F32
  • Tom and Carols F32
  • Nils Helbig F9R
  • Allan Smiths F44SC
  • Alcatraz F41

Popular Posts

  • Bogging port hull
    I use the Australian word, bog for this. The American/English word putty sounds like something you might eat..... Bog is a mix of epoxy and ...
  • Laminated starboard side
    I forgot to post this picture but it shows hull after vacuum bagging inside laminate, including uni carbon strip along keel. Also I cut down...
  • Infusion port side
    Hi all It's been a long time but this project is not over yet allthough some might have that thought..... I tried to infuse the outer ha...
  • Rebuild of a F25 daggerboard
    For my fellow trimaran owner/builder Per Folm Hansen I made an attempt to rebuild an older daggerboard to a High aspect shape that is Larry ...
  • Making daggerboard case
    Daggerboard case is normally done in plywood and wooden battens, but i saw that the F22 is done over a mold with glass tapes as joints. So ...
  • Taping ancher well floor and forward bulkhead
    Hi there a note from the no-workspace-at-all department. I fitted the ancherwell floor in place before fitting the starboard side of the f...
  • Planking starboard hull
    Planking in progress, note extra 5cm stringer at top for vacuumtape, also extra stringer where high density insert along keel. I start at in...
  • Carbon mast
    I just got hold of a Marstrom carbon mast, only problem is that it is in two parts. I should be able to join the pieces where th...
  • More update
    Bow with HD for winch u-bolt. Carbon tube for bowpole stay(?) Daggerboard case with carbon stringers. The red color comes from the spray a...
  • Laminated starboard deck
    Crawling along inside adding peelply , I kneel on some layer of soft foam. Did all by myself and it went allright with slow ...