Monday, August 22, 2011

More update

Bow with HD for winch u-bolt.
Carbon tube for bowpole stay(?)
Daggerboard case with carbon stringers. The red color comes from the spray adhesive used to hold fabrics in place before infusion. I know of builders that use syntetic stamples but I dont find them here in DK, they can be found in the Nederlands but in large quantities >5000 .

Per Folm sold me some 7 mm Dynex Dux line and Colligo timples to make shrouds, so I made the modified Brummelsplice, very easy to do.

Wednesday, August 17, 2011

Summer update

Interior is ready to get boat out of the mold. Lots of firewood for the winter.....

Bottom of boat.

Filling holes and seams to infuse the bottom.

Deck infused, I choose to do it in two tempies, since working with the boat on the side makes it quite high.

Cockpit floor reinforced with layers of unicarbon both sides. An other layer of glass will be added once the stern is ready.
New roofing for the shed, the old one leaked a lot. This is a 15 mm plywood with prefitted tar roofing, self adhesive overlayes, quite smart, and very easy to install, thanks Jacob for the materials, and Grus for helping me.